What Does Levoit Air Purifier Red Light Mean & How To Reset It?

Tweet Pin it Reddit
I may get commissions for purchases made through links in this post.

How To Fix Levoit Air Purifier Red Light

The filter inside your Levoit air purifier is an important part of how the machine works. In order for the air purifier to work at its best, the filter needs to be replaced regularly. Your Levoit air purifier will display a red light behind the check filter indicator button when it is time to change your filter. Keep reading to learn more about how to do this and then how to reset the Levoit air purifier red light.

Levoit Air Purifier Check Filter Indicator Red Light

The ‘Check Filter’ indicator light looks different depending on the model you have. On some, it will look like a cylinder with two vertical lines in it. On others, it will look like two vertically oriented rectangles with horizontal lines. Regardless, when this light on your Levoit air purifier turns red, it is time to replace your filter.

In addition to cleaning pre-filter at least once a month, the filter should be replaced every 6 to 8 months. If you use your Levoit air purifier very often, you should change it closer to six months. If you are using the air purifier in a location with bad air quality and lots of pollution, you’ll want to replace the filter more frequently, even if the red light does not turn on. Always use a genuine Levoit air purifier filter replacement for best results.

How To Replace Your Levoit Air Filter When The Red Light Appears

Follow these simple steps to replace the air filter in the Levoit purifier. Find the instructions and genuine replacement filters for the most popular Levoit air purifier models below.

Core 300s

  • Unplug the Levoit air purifier. Flip it over and then remove the cover by twisting it counterclockwise
  • Take out the old filter
  • Look inside the air purifier. If you see any dust or pet hair inside, use a vacuum hose to clean it out. Never use any water or liquid to clean the inside of the air purifier!
  • Remove the plastic packaging from the new filter and insert it into the housing with the filter handle facing up.
  • Replace the cover. Twist it clockwise to lock it. You should hear a snap. Once it is locked, you can plug the unit in.
  • Turn the air purifier on and then press and hold the sleep mode button for three seconds. This should reset the Levoit air purifier red light.

VeSync Core 400s

  1. Unplug the purifier. Flip it over or lay it on its side.
  2. Twist the filter cover counterclockwise so that the arrow lines up with the unlock symbol. Lift it up to remove it.
  3. Remove the old filter from the bottom half of the air purifier.
  4. Look inside the air purifier. If you see any dust or pet hair inside, use a vacuum hose to clean it out. Never use any water or liquid to clean the inside of the air purifier!
  5. Remove the plastic packaging from the new filter and insert it into the base of the air purifier.
  6. Replace the filter cover. Turn it clockwise until the arrow lines up with the locked symbol. You should hear it snap shut.
  7. Press and hold the check filter indicator button for 3 seconds.

VeSync Core 600s

  1. Unplug the purifier and place it on a flat surface. The display should be facing up.
  2. Twist the top half of the purifier counterclockwise. Lift it up to remove it.
  3. Remove the old filter from the bottom half of the air purifier.
  4. Remove the plastic packaging from the new filter and insert it into the base of the air purifier.
  5. Place the top half back onto the bottom half, making sure to line up the corners. Press down. The top half should snap into place.
  6. Press and hold the check filter indicator button for 3 seconds.

LV-PUR131

  1. Unplug the air purifier. Remove the filter cover. Take out the used filters.
  2. Look inside the air purifier. If you see any dust or pet hair inside, use a vacuum hose to clean it out. Never use any water or liquid to clean the inside of the air purifier!
  3. Take the new filters out of the plastic packaging.
  4. First, place the High Efficiency Activated Carbon filter into the housing with the pull tabs facing out.
  5. Next, put the Fine Preliminary and True HEPA Combination Filter into the housing with the pull tabs facing out.
  6. Replace the filter cover by lining up feet of the cover with the slots on the bottom of the housing. The triangle-shaped piece at the bottom of the cover should be touching the safety switch. Push the cover closed.
  7. Find the button vent on the side of the air purifier. Use a paperclip to press the Filter Indicator Reset Button in the vent.

LV-H132

  1. Unplug the machine and flip it over. Remove the filter cover by twisting filter cover counterclockwise to the OPEN position and then lifting it off.
  2. Take out the old air filter.
  3. Look inside the air purifier. If you see any dust or pet hair inside, use a vacuum hose to clean it out. Never use any water or liquid to clean the inside of the air purifier!
  4. Remove the plastic packaging from the new filter and insert it into the housing with the tabs facing out. Place the pre-filter into the air purifier.
  5. Replace the cover. Line up the arrow with the arrow labeled OPEN. Then, twist it clockwise to lock it by lining the arrow up with LOCK. You should hear a snap. Once it is locked, you can plug the unit in.
  6. Turn the air purifier on and then press and hold the air filter button for three seconds until the unit beeps. This should reset the Levoit air purifier red light.

LV-H133

  1. Unplug the air purifier. Remove the filter cover.
  2. Remove the used filter.
  3. Use a vacuum to clean any dust or debris from inside the filter housing. Never use water!
  4. Remove the plastic packaging from the new filter and insert it into the housing with the black pull tabs facing out.
  5. Replace the filter cover. Plug in and turn on the unit.
  6. Press and hold the check filter indicator button for 3 seconds.

Vital 100

  1. Unplug the air purifier. Remove the filter cover. Take out the used filter.
  2. Look inside the air purifier. If you see any dust or pet hair inside, use a vacuum hose to clean it out. Never use any water or liquid to clean the inside of the air purifier!
  3. Take the new filters out of the plastic packaging. Place it inside the unit with the pull tabs facing out.
  4. Replace the filter cover by lining up feet of the cover with the matching slots on the bottom of the housing. Push the cover closed.
  5. Press and hold the check filter indicator button for 3 seconds

How To Reset Levoit Air Purifier Filter Red Light

If you replaced your Levoit filter, are you confused by why the red filter indicator light is still on? On all Levoit air purifier models, you have to need to manually reset the check filter red light. Follow the steps below for the model you have.

Levoit Purifier ModelHow To Reset Levoit Filter Red Light
Core 300sPress and hold the sleep mode button for three seconds
VeSync Core 400sPress and hold the check filter indicator button for 3 seconds
VeSync Core 600sPress and hold the check filter indicator button for 3 seconds
LV-PUR131Find the button vent on the side of the air purifier. Use a paperclip to press the Filter Indicator Reset Button in the vent.
LV-H132Press and hold the air filter button for three seconds until the unit beeps
LV-H133Press and hold the check filter indicator button for 3 seconds
Vital 100Press and hold the check filter indicator button for 3 seconds

Leave a Reply

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.